Category:Hardware & Tools/Pipe Fittings/Tee Fittings

Product Description:   Product Features ( Utility Model Patent for Aeration Hose Bracket: ZL 2008 2 0300465.9 )·1. This product is a flexible tubular aerator made from chemically enhanced modified plastic material;·2. The entire circumference of the hose is perforated for aeration, producing medium and fine bubbles in water, with slow bubble rise speed, uniform air distribution, and high oxygen utilization rate;·3. The hose expands during aeration and flattens under hydrostatic pressure when not in use, which helps prevent sludge backflow to some extent;·4. The hose wall thickness is only 2mm, with short and straight air channels, resulting in low air pressure loss;·5. The aeration pores are narrow elongated slits, with variable width within a certain range;·6. The inner surface of the hose is smooth, making it resistant to biofilm attachment;·7. No air filtration equipment is required; aeration can be stopped at any time, and the hose will not clog regardless of the duration of shutdown;·8. Easy assembly with low flatness requirements for installation; the air supply pipe and aeration hose are integrated at the tank bottom, eliminating the need for additional piping equipment, and the cost is lower than other microporous aerators;·9. Good resistance to acids and alkalis;·10. Can be coiled for packaging, compact size, convenient for packaging and transportation.>Design Reference·1. Recommended technical parameter values for design: aeration capacity 5m3/m·h, oxygen utilization rate 12%;·2. The hose should typically be installed 200-300mm above the tank bottom, with a spacing of 500mm between hoses, adjustable based on water quality, removal load, and oxygen demand;·3. Within a certain range, multiple aeration hoses (generally no more than 10) can be connected to the same air distribution pipe as a group, controlled by one valve. To ensure uniform air supply to all hoses in the group, consider appropriately enlarging the diameter of the air distribution pipe;·4. When using aeration hoses in activated sludge processes, especially in Sequencing Batch Reactor (SBR) systems, it is recommended to include sludge discharge measures in the design to allow for sludge removal from the pipes when necessary.>Product SpecificationsSpecificationPore Density (pcs/m)Water Depth (m)Aeration Capacity (m3/m·h)Service Area (m2/m)Hose Pressure Strength (kg/cm2)Oxygen Utilization Rate (%)Resistance Loss (m water column)Oxygenation Efficiency (kgO?/kW·h)?6550601-50-80.5-1110-160.36-0.51.56-11.47>Packaging Standard·1. Carton packaging;·2. Packaging dimensions: 800×480×120mm;3. Unit weight: 30kg per package, 50m per package.  >Installation Procedure·1. Review installation construction drawings;·2. Verify that the on-site tank dimensions match the construction drawings;·3. Based on site conditions and drawings, first position the main air supply pipe;·4. Mark the installation lines for the aeration hoses;·5. Drill holes along the lines: specification ?12×40mm, spacing 500mm, insert galvanized expansion plugs, ensure uniform height, drive in the expansion cores to secure the plugs;·6. Insert stainless steel threaded rods into the galvanized expansion plugs, screw in fully and tighten;·7. Adjust the opening direction of the plastic rings on the aeration hose brackets to align with the length of the hose, then tighten the nuts at the bottom of the plastic rings;·8. Open the upper half of the plastic rings;·9. Connect one end of the aeration hose to the fitting, secure with two hose clamps. Then, pull the hose from above the bracket toward the other end of the fitting, tighten, and secure with two hose clamps at the connection. (If air supply is from one end only, connect a DN50 ABS pipe with a blind cap at the hose end and secure it.)·10. Close the upper half of the plastic rings and tighten; the aeration hose installation is complete. Other hoses are installed similarly.·11. Precautions:o (1). Do not drill expansion bolt holes too deep; 40mm is optimal. Strictly prevent dust ingress, as it may affect stainless steel rod installation;o (2). Avoid twisting the aeration hose; ensure it is laid flat and straight;o (3). When tightening plastic rings, ensure they are properly aligned to avoid misalignment, which may create sharp edges and cause wear on the hose;(4). It is recommended to install a sludge discharge and drain pipe at the main air supply pipe, along with a drain valve, to ensure long-term reliable and stable operation of the aeration system. more>

Category:Hardware & Tools/Pipe Fittings/Tee Fittings

Product Description:   Product Features (Utility Model Patent for Aeration Hose Bracket: ZL 2008 2 0300465.9)·1. This product is a flexible tubular aerator made from chemically enhanced modified plastic;·2. The entire circumference of the hose has pores for aeration, producing medium and fine bubbles in water. The bubbles rise slowly, ensuring uniform air distribution and high oxygen utilization rate;·3. The hose expands during aeration and flattens under hydrostatic pressure when not in use, which helps prevent sludge backflow to some extent;·4. The hose wall thickness is only 2mm, with short and straight air channels, resulting in minimal air pressure loss;·5. The pores are narrow, elongated slits with variable width within a certain range;·6. The inner surface of the hose is smooth, making it resistant to biofilm attachment;·7. No air filtration equipment is required. Aeration can be stopped at any time, and the hose will not clog regardless of the duration of stoppage;·8. Easy assembly with low flatness requirements for installation. The air supply pipe and aeration hose are integrated at the bottom of the tank, eliminating the need for additional piping equipment. The cost is lower compared to other microporous aerators;·9. Excellent resistance to acids and alkalis;·10. Can be coiled for packaging, resulting in small volume and convenient packaging and transportation.>Design Reference·1. Recommended technical parameters: aeration rate 5m3/m·h, oxygen utilization rate 12%;·2. The hose should generally be placed 200-300mm above the tank bottom, with a spacing of 500mm between hoses. Adjustments can be made based on water quality, removal load, and oxygen demand;·3. Within a certain range, multiple aeration hoses (generally no more than 10) can be connected to the same air distribution pipe as a group, controlled by one valve. To ensure uniform air supply to all hoses in the group, consider appropriately enlarging the diameter of the air distribution pipe;·4. When using aeration hoses in activated sludge processes, especially in Sequencing Batch Reactor (SBR) systems, it is recommended to include sludge discharge measures in the design to allow for sludge removal from the pipes when necessary.>Product SpecificationsSpecificationPore Density (pcs/m)Water Depth (m)Aeration Rate (m3/m·h)Service Area (m2/m)Hose Pressure Strength (kg/cm2)Oxygen Utilization Rate (%)Resistance Loss (m water column)Oxygenation Efficiency (kgO?/kW·h)?6550601-50-80.5-1110-160.36-0.51.56-11.47>Packaging Standard·1. Carton packaging;·2. Packaging dimensions: 800×480×120mm;3. Unit weight: 30kg/pack, 50m/pack.  >Installation Procedure·1. Review installation construction drawings;·2. Verify that the on-site tank dimensions match the construction drawings;·3. Based on the site conditions and drawings, first position the main air supply pipe;·4. Mark the installation lines for the aeration hoses;·5. Drill holes along the lines: specification ?12×40mm, spacing 500mm. Insert zinc-plated expansion bolts, ensure uniform height, drive in the expansion cores to secure the bolts;·6. Insert stainless steel threaded rods into the zinc-plated expansion bolts, screw them in fully and tighten;·7. Adjust the opening direction of the plastic rings on the aeration hose brackets to align with the length direction of the hose. After adjustment, tighten the lower nuts of the plastic rings;·8. Open the upper half of the plastic rings;·9. Connect one end of the aeration hose joint and secure it with two hose clamps. Then, pull the aeration hose from above the bracket toward the other end of the joint, tighten it, and secure the joint with two hose clamps. (If only one end is for air intake, connect a DN50 ABS pipe with a blind cap to the end of the aeration hose and secure it.)·10. Close the upper half of the plastic rings and tighten them. The aeration hose installation is complete. Other hoses are installed in the same manner.·11. Precautions:o (1) Do not drill expansion bolt holes too deep; 40mm is ideal. Strictly prevent dust from entering, as it may affect the installation of stainless steel threaded rods;o (2) Do not twist the aeration hose; it must be laid flat and straight;o (3) When tightening the plastic rings, ensure there is no misalignment, as it may create sharp edges that could wear the aeration hose;(4) It is recommended to install a sludge discharge and drain pipe at the main air supply pipe location, along with a drain valve, to ensure the aeration system operates reliably and stably over the long term. more>

Category:Hardware & Tools/Cutting Power Tools/Drill Bits

Product Description:Integrated Building Equipment Monitoring SystemI. System OverviewThe Integrated Building Equipment Monitoring System should consist of a power distribution monitoring system, electrical fire monitoring system, air conditioning control system, water pump control system, exhaust fan control system, SPD monitoring system, energy consumption monitoring system, lighting control function, and other systems, forming an integrated monitoring platform. It strictly complies with the new standard "Integrated Building Equipment Monitoring System," effective from August 1, 2020. Traditional power distribution systems, which rely on manual operation and conventional electrical protection components, can no longer meet market demands. There is an urgent need for intelligent online operation, maintenance, management, and service platforms. Yachuan Technology's Integrated Building Equipment Monitoring System, based on market feedback, utilizes IoT and big data technologies to provide operation and maintenance companies with comprehensive online and offline operation and maintenance services. The software platform of the Integrated Building Equipment Monitoring System serves as a link between operation and maintenance units and electricity-consuming enterprises, monitoring the operational status and electricity consumption data of users' power distribution systems as a whole, thereby offering better operation and maintenance services to customers. The platform provides functions such as system overview, electrical safety parameters, power data monitoring, power quality analysis, electricity consumption statistics and analysis, daily/monthly/annual energy statistical reports, abnormal warnings, incident alarms and event records, operational environment monitoring, and operation and maintenance inspection dispatch. It also supports multi-platform and multi-terminal data access.<img src="file:///C:\Users\Administrator\AppData\Local\Temp\ksohtml5404\wps2.jpg"/>II. System Features1. Graphical programming, supports 3D display2. Internet platform, supports remote APP access3. Multi-protocol support, multi-vendor compatibility4. Universal protocol parsing with dynamic adaptation5. Simplified installation and construction, cost-effectiveSpecific equipment models are as follows:LDN2000 PF4 B Fan Energy-saving Controller, installed in the fan distribution box, integrated intelligent management and control systemLDN2000PY4 B Fan Energy-saving Controller, installed in the smoke exhaust distribution box, integrated intelligent management and control systemLDN2000 KS2B Energy-saving Controller, installed in the distribution box, integrated intelligent management and control systemLDN200O RS2B Energy-saving Controller, installed in the hot water pump distribution box, integrated intelligent management and control systemLDN200O ZM4 Lighting Energy-saving Controller, installed in the lighting distribution box, integrated intelligent management and control systemLDN200O ZM8 Lighting Energy-saving Controller, installed in the lighting distribution box, integrated intelligent management and control systemLDN200O ZT8 Lighting Dimming Controller, installed in the lighting distribution box, integrated intelligent management and control systemLDN200O WG2A Intelligent Gateway, installed in the gateway box, integrated intelligent management and control systemHMI Integrated Intelligent Management and Control SystemPartial Typical ProjectsNanchang Zhongwei Commercial, Shanghai Songjiang District Stadium, Yangtze River Poyang Lake Aquatic Life Protection Base, Yueyang Free Trade Zone Digital Economy Industrial Complex Construction Project, Feng County Hospital Medical Technology Comprehensive Building, Ankang Traditional Chinese Medicine Hospital, Lugu Seventh Primary School, Lugu Fifth Primary School, Weifang High-speed Rail New Area Development and Construction Project, Qishan Hospital, Zhengzhou Xinyueyuan, Zhengzhou China-Europe Railway Express Assembly and Dispatch Command Center, Wuwei Leitai Scenic Area, Xi'an International Port Area 2017 Shantytown Renovation Phase I Resettlement Housing Construction Project, Qishan County Outpatient Building, Jinfangyuan Wanda Plaza, Wuxi World Internet of Things Conference Permanent Venue, Xi'an Qujiang Yuanzhu, Ningxia Workers' Sanatorium, Jiangsu Yixing Dajue Temple, China-South Korea Changchun International Cooperation Demonstration Zone Cross-border E-commerce Industrial Park, Chengdu High-tech Zone Western Park Cooperation Street Office, Jiangsu Huihong International Group, Nanjing Gaochun Baolong Plot D, Yunnan Kunming Poly City Phase II Yumengyuan ProjectYachuan Services1. Dedicated technical personnel to design system solutions and perform secondary system design optimization;2. Dedicated technical service personnel:Guide or be responsible for on-site wiring during construction.Adjust parameters of each device on-site according to the construction environment to ensure suitability.Debug the local system and cloud platform monitoring system of the monitoring center on-site based on the application environment.Proactively cooperate with other monitoring systems for network debugging.3. Conduct on-site technical seminars and provide free training for engineering technicians and maintenance personnel to help them master the performance of the equipment used, the composition of the backend monitoring system and cloud platform, debugging, maintenance, etc.;4. In case of quality issues, if problems cannot be resolved over the phone as per customer needs, arrive on-site within eight hours after notification; troubleshooting continues until the device operates normally, and maintenance personnel may leave only after user confirmation. The signed maintenance form is uniformly submitted to the company for archiving;5. Products are covered by a "three guarantees" policy and enjoy lifelong after-sales service. Within one year, if quality issues arise due to non-human factors, the company provides free repair or replacement; after one year, quality issues are maintained free of charge, with only cost fees charged for replacement parts;6. Lifelong free upgrades for the backend monitoring system software and cloud platform system;7. 24-hour technical support for technical consultation, promptly resolving practical issues during product use.For detailed product information, pricing, and technical parameters, please contact the responsible person:Manager Liu13572979371 135 7297 9371 (same as WeChat ID) more>

Category:Hardware & Tools/Cutting Power Tools/Drill Bits

Product Description:Horizontal Steel Wire Wrapping Machine Fully Automatic Sealing Machine Automatic Stretch Wrapping Machine Horizontal Steel Wire Wrapping Packaging Guangdong Film Wrapping Machine is a new type of wrapping packaging equipment designed and manufactured for the metallurgical industry. It is widely used for the wrapping packaging of copper strips, steel strips, aluminum strips, bearings, steel wires, welding wires, cables, tires, hoses, and other various annular objects. After wrapping, the product not only has an aesthetically pleasing appearance but also provides excellent moisture resistance, dust resistance, rust resistance, aging resistance, and protection against accidental damage. This machine offers high safety, fast packaging speed, a wide range of packaging applications, and simple operation. It is an ideal choice for improving work efficiency, saving working time, reducing product packaging costs, and enhancing product quality. Product Features: Equipped with PLC microcomputer control and human-machine interface touchscreen. Simple operation: input the product's outer diameter, inner diameter, and width, and the PLC system automatically calculates the packaging length and number of turns. Frequency conversion control allows adjustable overlapping of the packaging tape as needed. Automatic positioning and automatic tape cutting. Manual/automatic working mode selection. Equipped with a tape attachment device. Reciprocating operation. Adjustable tightness of the packaging tape. Both support rollers and guard rollers are coated with high-pressure-resistant polyurethane. Adjustable slip ring height. Safe, convenient, and compact footprint. Tire Steel Ring Wrapping Machine Fully Automatic Sealing Machine Guangdong Stretch Wrapping Machine Technical Parameters: Model YC-GS Horizontal Steel Wire Wrapping Machine Product width ≤300mm----Product outer diameter 500mm≤1000mm Product inner diameter 300≤500mm----Packaging materials: woven tape, composite paper (tape width 70-90mm, maximum outer diameter 600mm) Annular rotation speed 0-80r/min----Support roller speed 0-12r/min Support roller height approx. 500mm-----Roller load capacity ≤2000kg Overlap range 0%-70%任意重疊 (adjustable) Voltage/Frequency Three-phase four-wire 380V/50Hz-----Machine dimensions 2500mm×W1850mm×H1800mm Weight approx. 1000kg Total power approx. 3kw Automatic Stretch Wrapping Machine Guangdong Stretch Wrapping Machine Tire Steel Ring Wrapping Machine more>

Category:Hardware & Tools/Pipe Fittings/Tee Fittings

Product Description:Hose and tire winding machine, portable electric strapping machine, swing arm winding machine, hose winding packaging machine uses plastic film or kraft paper as packaging materials to individually wrap various circular items through winding. It provides dustproof and cleaning effects, and enhances the product's appearance quality. Suitable for various circular and ring-shaped items such as hoses, coils, and cables. PLC microcomputer control. The packaging ring body adopts variable frequency speed regulation technology, allowing adjustment of the overlap degree of the winding tape according to packaging requirements. Equipped with a conical positioning roller device to ensure the rotating ring passes correctly through the center of the packaged item. Horizontal winding machine, portable electric strapping machine, Shenzhen pre-stretch winding machine. Technical parameters: Product height ≤200mm; Product outer diameter 600～1100mm; Product inner diameter ≥400mm; Working surface height 150mm; Roller speed 3～5m/min; Slip ring speed approx. 50r/min; Overlap range 30%～70%; Packaging materials: woven tape/wrapping film/composite paper, etc.; Packaging material dimensions: width: 80mm, outer diameter: 200mm, inner diameter: 55mm; Power approx. 1.0kw; Power supply 380V/50Hz three-phase four-wire; Air source 6～8/cm2. Swing arm winding machine, Shenzhen pre-stretch winding machine, horizontal winding machine. more>

Category:Hardware & Tools/Cutting Power Tools/Drill Bits

Product Description:建筑設備一體化監控系統一、系統概述建筑設備一體化監控系統應具有配電監控系統、電氣火災監控系統、空調控制系統、水泵控制系統、排風控制系統、SPD監測系統、能耗監控系統、照明控制功能等系統組成，一體化監控平臺。嚴格執行新規范《建筑設備一體化監控系統》，2020年8月1日執行。傳統配電系統，采用人工+傳統電氣保護元件，已無法滿足市場需求，迫切需要配套智能化線上運維管理和服務平臺，亞川科技-建筑設備一休化監控系統根據市場需求反饋，運用物聯網和大數據技術，為運維公司提供配套線上、線下運維服務。建筑設備一體化監控系統軟件 平臺作為連接運維單位和用電企業的紐帶，整體監視用戶配電系統的運行狀態和用電量數據，為客戶提供更好的運維服務，平臺提供系統總覽、電氣安全參數、電力數據監測、電能質量分析、用電統計分析和日/月/年電能統計報表、異常預警、事故報警和事件記錄、運行環境監測、運維巡檢派單等功能，并支持多平臺、多終端數據訪問。<img src="file:///C:\Users\Administrator\AppData\Local\Temp\ksohtml5404\wps3.jpg"/>二、系統功能特點1.圖形化編程、支持三維立體顯示2.互聯網平臺、支持遠程APP訪問3.多協議支持、多廠家兼容4.萬能協議解析動態適配5.簡化施工安裝、性價比高設備具體型號如下：LDN2000 PF4 B風機節能控制器，安裝于風機配電箱內,一體化智能管控系統LDN2000PY4 B風機節能控制器，安裝于排煙配電箱內，一體化智能管控系統LDN200O KS2B節能控制器，安裝于配電內一體化智能管控系統LDN200O RS2B節能控制器，安裝于熱水泵配電內一體化智能管控系統LDN200O ZM4照明節能控制器，安裝于照明配電箱內一體化智能管控系統LDN200O ZM8照明節能控制器，安裝于照明配電箱內一體化智能管控系統LDN200O ZT8照明調光控制器，安裝于照明配電箱內一體化智能管控系統LDN200O WG2A智能網關，安裝于網關箱內一體化智能管控系統HMI一體化智能管控系統部分典型業績南昌中唯商業、上海松江區體育館、長江潘陽湖水生物保護基地、岳陽自貿區數字經濟產業綜合體建設項目、鳳縣醫院醫技綜合樓、安康中醫院、陸港七小、陸港五小、濰坊高鐵新片區開發建設項目、岐山醫院、鄭州馨悅苑、鄭州中歐班列集結調度指揮中心、武威雷臺景區、西安國際港務區2017年棚戶區改造一期安置房建設項目、岐山縣門診樓、金方圓萬達廣場、無錫世界物聯網大會永久會址、西安曲江源著、寧夏工人療養院、江蘇宜興大覺寺、中韓長春國際合作示范區跨境電商產業園、成都高新區西部園區合作街辦所、江蘇匯鴻國際集團、南京高淳寶龍D地塊、云南昆明市保利城二期喻夢園項目亞川服務1.專門的技術人員為您設計系統方案，做系統二次設計優化設計；2.專門的技術服務人員：指導施工現場布線或負責現場布線。根據施工環境現場調試每一臺設備的參數，使之切合使用。根據應用環境現場調試監控中心的本地系統和云平臺監控系統。主動配合與其它監控系統聯網調試。3.現場舉辦技術講座、免費對工程技術人員及維護人員進行培訓，使其能掌握所用裝置的性能，與后臺監控系統和云平臺的組成，調試與維護等；4.如出現質量問題時，根據客戶需要電話不能解決的，接通知后八小時內到達現場；排除故障至裝置正常運行后經用戶簽字確認，維修服務人員方可離開，經用戶簽字確認的維修單統一交公司存檔；5. 產品實行“三包”，享受終身售后服務，一年內產品由于非人為因素出現質量問題，公司負責免費維修或更換；一年后出現質量問題免費維護，所需更換零配件僅收取成本費用；6.終身享有后臺監控系統軟件和云平臺系統的免費升級；7.技術支持24小時提供技術咨詢，及時解決產品在使用過程中的實際問題。如需了解詳細產品、價格、技術參數；請咨詢負責人：劉經理13572979371 一三五 七二九七九三七一（同微信號） more>

Category:Hardware & Tools/Wrenches/T-Handle Wrenches

Product Description:I. Product Overview:? The machine features a simple and aesthetically pleasing design, compact size, and lightweight construction, making it easy to operate and highly flexible. It allows simultaneous operation on both sides of the rail for tightening or loosening sleeper nuts, ensuring high work efficiency;? The machine adopts a fully enclosed oil-lubricated transmission system, providing excellent lubrication, wear resistance, and long service life. With meticulous design and processing, it offers high strength, rigidity, and minimal failure, making it suitable for use in harsh outdoor environments;? It delivers a wide range of tightening torque outputs, allowing easy adjustment according to operational requirements with accuracy, stability, and reliability;? The nut socket utilizes a universal floating connection method, enabling easy engagement with sleeper bolt nuts. During operation, if the socket jams with the sleeper bolt nut, it can be quickly and conveniently detached from the main unit, allowing the machine to be swiftly moved outside the railway clearance to ensure construction safety;? This dual-head sleeper internal combustion bolt wrench is suitable for straight and curved track lines laid with various types of rails in China, providing efficient, stable, and safe construction and maintenance for sleeper fasteners;? The product meets the requirements of TB/T3099 "General Technical Conditions for Sleeper Bolt Power Wrenches".II. Technical Parameters:NLB-600-1P Internal Combustion Dual-Head Bolt Wrench (For Conventional Railways)Technical Parameters: Four-stroke gasoline engine (Power 170F) 7HPTightening Torque Adjustment Range: 80–350 N·mMaximum Loosening Torque: ≥600 N·mWorking Socket Speed: 136 r/minSocket Center Distance: 214 mmWork Efficiency: ≤3 seconds per nutMachine Weight: 70 kgDimensions (L×W×H): 825×585×975 mmNLB-600-1G Internal Combustion Dual-Head Bolt Wrench (For High-Speed Railways)Technical Parameters: Four-stroke gasoline engine (Power 170F) 7HPTightening Torque Adjustment Range: 80–350 N·mMaximum Loosening Torque: ≥650 N·mWorking Socket Speed: 136 r/minSocket Center Distance: 234 mmWork Efficiency: ≤3 seconds per nutMachine Weight: 73 kgDimensions (L×W×H): 825×585×975 mm more>

Category:Hardware & Tools/Wrenches/T-Handle Wrenches

Product Description:Composed of the main unit, control system, battery system, and rail walking mechanism. It features a compact structure, light weight, flexible assembly and disassembly, ease of use, and zero exhaust emissions.It can be transported in separate parts, facilitating on-site handling by a single person, with each part weighing less than 15kg. Suitable for railway laying, maintenance, and emergency repairs, specifically designed for various railway bolt operations.Integrated torque can be displayed and adjusted in real-time, with torque compensation function; a zero-cost maintenance-free design significantly reduces daily maintenance costs.Main Technical ParametersRated Voltage (DC.V): 36Motor Speed (rpm): 0-3000 (optional)Impact Frequency (bpm): 0-5000 (optional)Weight (Kg): 35Torque (N.m): >3000Battery Capacity (Ah): 24-48Operating Temperature Range (℃): -40~50℃Applicable Bolt Size Range: M6-M30Torque Control: Adjustable and controllable more>

Category:Hardware & Tools/Cutting Power Tools/Drill Bits

Product Description:Main Technical Parameters1. Gasoline engine: Power 9 horsepower  Rated speed 3300 rpm2. Cutting wheel: φ400×φ32×43. Rail cutting range: 43-75 kg/m4. Cutting surface verticality and flatness error ≤0.5 mm5. Cutting time: 60 kg/m rail 1～1 minute 30 seconds6. Wheel utilization rate43 kg/m rail, can be used for cutting 6-8 times50 kg/m rail, can be used for cutting 5-7 times60 kg/m rail, can be used for cutting 4-6 times7. Overall dimensions: 500×500×600 mm8. Total weight: 43 kg more>

Category:Hardware & Tools/Fasteners & Connectors/Other Fasteners & Connectors

Product Description:       作業本印刷，學生作業本印刷定制選雙豐印務， 實體印刷廠直印，紙質品印刷廠家。主營：書籍書刊印刷，教輔教材印刷，作業本印刷，筆記本印刷，各類資料印刷，各類精裝書印刷定制，家譜印刷，畫冊印刷，紀念冊印刷，海報印刷， 宣傳單印刷，手提袋印刷，檔案袋印刷，不干膠印刷等等。<img src="https://img-i-album.toocle.com/view/2022/06/15/5b/62a9a0d704c5b.jpg" style="max-width:100%;"/>      南陽市雙豐印務有限公司創建于2004年,注冊資金1000萬元整,建地面積10000平方米,綠色認證及QS質量認證企業,擁有制版、印刷、裝訂、裁切等全新配套設備30余臺,員工80余人,設計團隊10余人、技工12人,是一家集設計制作、印刷、后加工為一體的印刷企業。有商業輪轉機、4色平板機及雙面BB機等印刷設備,工藝設備全，適應于不同規格、不同紙張、不同克重及不同色彩的各類印刷品;國內的騎馬聯動線、全自動膠訂線及高速折頁機等眾多配套印后設備,滿足各種精簡裝圖書印刷、書商書籍印刷，作業本印刷，教輔教材印刷，出版物印刷，家譜印刷,雜志印刷等的裝禎要求和發行時效.<img src="https://img-i-album.toocle.com/view/2022/06/15/24/62a9a11516524.jpg" style="max-width:100%;"/>      主營：各類精裝書印刷， 書籍書刊印刷，教材印刷，教輔印刷， 家譜印刷， 雜志印刷， 期刊印刷，畫冊印刷，宣傳冊印刷，紀念冊印刷，網校教材印刷，教輔印刷，各類資料印刷，筆記本印刷，檔案袋印刷， 手提袋印刷，各類單據印刷，封套印刷， 臺歷印刷， 掛歷印刷，作業本印刷，字帖印刷，記事本印刷，海報印刷， 不干膠印刷，宣傳單印刷，各類等級考試教材印刷， 試卷印刷等等紙質品印刷。歡迎新老顧客來電咨詢或到廠參觀指導！ more>

Category:Hardware & Tools/Cutting Power Tools/Drill Bits

Product Description:Installation Notes1. Place the machine on a level surface without shaking, then add approximately 60 kilograms of 68# or 46# hydraulic oil.2. The motor of this machine is 3-phase—380V—50Hz. Please verify whether the local voltage matches the machine's requirements. After connecting the wires (wire size should correspond to the motor's power), turn on the power and check the motor's rotation direction (indicated by the arrow) for clockwise rotation. If the direction is incorrect, adjust the connection of the two live wires.MaintenanceThis machine should be operated and maintained by designated personnel. After each workday, turn off the main power, clean debris around the machine, and remove any foreign objects inside the machine.Regularly check whether screws at various parts of the machine are loose. For new machines, parts prone to loosening include: the small flange screws on the central shaft and the large screws inside the pressure plate. These should be reinforced periodically.Safety PrecautionsBefore starting the packaging process, first check whether all doors are properly closed, whether the door lock core is fully engaged, and whether the blade latch is secured. Do not proceed with packaging if any of these parts are not properly engaged to avoid accidents.When the machine is in operation, stand beside the machine and avoid extending the head, hands, or any part of the body into the door area to prevent crushing injuries. more>

Category:Hardware & Tools/Fasteners & Connectors/Other Fasteners & Connectors

Product Description:       For exam paper printing, choose Nanyang Shuangfeng for student exam paper printing. Direct printing from the printing factory, self-built factory premises, 17 years of industry printing experience, paper product printing manufacturer. Mainly printing books, book printing, educational materials printing, textbook printing, coursebook printing, publication printing, book printing, exam paper printing, album printing, bookseller book printing, educational materials printing, document printing, guidebook printing, brochure printing, catalog printing, desk calendar printing, wall calendar printing, commemorative book printing, genealogy printing, ancient book printing, local chronicle printing, various hardcover book printing, flyer printing, poster printing, real estate material printing, adhesive label printing, and other paper product printing.<img src="https://img-i-album.toocle.com/view/2022/08/01/21/62e79f80ee921.jpg" style="max-width:100%;"/>        Nanyang Shuangfeng Printing Co., Ltd. was established in 2004, with a registered capital of 10 million yuan, covering an area of 10,000 square meters. It is a green-certified and QS quality-certified enterprise, equipped with over 30 new supporting devices for plate making, printing, binding, and cutting, with more than 80 employees, a design team of over 10 people, and 12 technicians. It is a printing enterprise integrating design, production, printing, and post-processing. With printing equipment such as commercial rotary presses, 4-color offset presses, and double-sided BB machines, the company has comprehensive process equipment suitable for various printed materials of different specifications, papers, weights, and colors. Numerous supporting post-press equipment, such as domestic saddle stitching lines, fully automatic adhesive binding lines, and high-speed folding machines, meet the binding requirements and distribution timelines for various simplified and hardcover book printing, bookseller book printing, document printing, educational material and textbook printing, publication printing, genealogy printing, magazine printing, etc. New and old customers are welcome to call for inquiries or visit the factory for guidance! more>

Category:Hardware & Tools/Wrenches/T-Handle Wrenches

Product Description:? Purpose: Used for loosening and tightening the bolts and nuts of railway track sleepers.? Power: Equipped with a two-stroke gasoline engine power source, with a power of 1.47KW.? Main technical parameters: Torque 550N.M, no-load speed 2700rpm, loaded speed 7120rpm, fuel tank capacity 1L, fuel mixture ratio 25:1, overall weight about 18KG.? Performance characteristics: Novel design, compact structure, small size, light weight, strong mobility, portable and easy to carry on and off the track, two-stage shock absorption on the handle, good balance, can stand vertically, and the operation switch is easily accessible.? Applicable scenarios: Particularly suitable for regional track maintenance operations in areas such as switches, tunnels, bridges, and culverts where large and medium-sized maintenance machinery cannot operate. It can also be used in remote areas without power facilities, air compressors, or generators, such as rainforests, mountains, or deserts.? Structure and working principle: Composed of a small gasoline engine, planetary gear transmission, rotation direction converter, impact booster, output shaft clutch, socket head, and operation handle. During operation, the engine's rotational torque is transmitted through the clutch, universal joint, and bevel gear reversing and reduction mechanism to achieve direction change and speed reduction, then passed to the impact booster mechanism, and finally used to loosen and tighten bolts and nuts via the socket. more>

Category:Hardware & Tools/Welding Materials & Accessories/Other Welding Materials

Product Description:The main use of Ag10 silver brazing strip is for brazing copper and copper alloys, steel, and hard alloys. It is suitable for various welding applications requiring high strength and high temperature resistance, such as brazing copper and copper alloys, and steel.Composition and CharacteristicsThe composition of Ag10 silver brazing strip mainly includes silver, copper, and zinc, with specific chemical components as follows:· Silver (Ag): 10%· Copper (Cu): approximately 52.0-54.0%· Zinc (Zn): approximately 36.0-38.0%In addition, Ag10 silver brazing strip has the following characteristics:· High strength: The brazing material has a strength of 451 MPa.· High temperature resistance: The melting point ranges between 815-850°C.· Good wettability and gap-filling ability, suitable for various complex welding requirements.Application FieldsAg10 silver brazing strip is widely used in various industrial fields, including:· Refrigeration: Used for welding refrigeration equipment.· Lighting: Used for welding lamps and lighting equipment.· Hardware and electrical appliances: Used for welding hardware and electrical products.· Instruments and meters: Used for welding precision instruments and meters.· Chemical industry: Used for welding chemical equipment.· Aerospace: Used for welding aerospace equipment. more>

Category:Hardware & Tools/Welding Materials & Accessories/Other Welding Materials

Product Description:ND Steel Welding ElectrodeDescription:ND steel welding electrode is a specialized electrode for 09CrCuSb acid dew point corrosion-resistant steel, featuring a low-hydrogen sodium-type coating. It uses DC power sources, offers excellent welding process performance, and supports all-position welding.Applications:Used for welding ND acid dew point corrosion-resistant steels, such as ND steel, JNS acid-resistant steel, BNS steel, MNS steel, etc.<img src="https://img-i-album.toocle.com/view/2025/05/28/88/6836ccc54a688.png" style="max-width:100%;"/><img src="https://img-i-album.toocle.com/view/2025/05/28/eb/6836ccdaa7eeb.png" style="max-width: 100%;"/><img src="https://img-i-album.toocle.com/view/2025/05/28/cd/6836ccde4adcd.png" style="max-width: 100%;"/><img src="https://img-i-album.toocle.com/view/2025/05/28/7f/6836cce22ea7f.png" style="max-width: 100%;"/> more>

Category:Hardware & Tools/Welding Materials & Accessories/Other Welding Materials

Product Description:ERTi-1 Marked Titanium Welding RodOther Available Grades:TA1, TA2, TA3, TA4, TA7, TA8, TA9, TA10, TA18, TC3, TC4, Ti80ATA1 ELI, TA2 ELI, TA3 ELI, TA4 ELI, TA8 ELI, ER TA1 ELI,ER TA2 ELI, ER TA3 ELI, ER TA4 ELI, ER TA7 ELI, ER TA9, ER TA10, ER TC4 ELI,ERTi-1, ERTi-2, ERTi-3, ERTi-4, ERTi-5, ERTi-7, ERTi-9, ERTi-12, ERTi-18, ERTi-23Applicable Standards:ASTM B863, AWS A5.16, GB/T3623, GB/T30562, NB/T47018.7Supply Range:Diameter 0.4~6.0mm x L, Straight Wire, Natural Coil, Wound Coil (D100/D300)Surface Treatment: Pickled Surface / Bright SurfacePackaging Types:1- Straight Wire: 5kg/bag/plastic box,2- Wound Coil: 0.8kg/coil, 1kg/coil, 10kg/coil,3- Natural Coil: 20~80kg/coil4- Customized according to customer requirementsApplication Fields:Aerospace, Power Energy, Military Defense, 3D Printing, Petroleum, Chemical, Automotive, Construction, Jewelry, Medical, and other industriesAircraft, Ships, Natural Gas, Automotive, Corrosion-Resistant Containers, Reactors, Heat Exchangers, Various Pumps and Valves, Boilers, Turbine Blades, etc.<img src="https://img-i-album.toocle.com/view/2025/06/05/75/68415f3718b75.png" style="max-width:100%;"/><img src="https://img-i-album.toocle.com/view/2025/06/05/c2/68415f427cfc2.png" style="max-width: 100%;"/><img src="https://img-i-album.toocle.com/view/2025/06/05/88/68415f48e2088.png" style="max-width: 100%;"/><img src="https://img-i-album.toocle.com/view/2025/06/05/15/68415f52eeb15.png" style="max-width: 100%;"/><img src="https://img-i-album.toocle.com/view/2025/06/05/bd/68415f56e7dbd.png" style="max-width: 100%;"/><img src="https://img-i-album.toocle.com/view/2025/06/05/f3/68415f5acabf3.png" style="max-width: 100%;"/><img src="https://img-i-album.toocle.com/view/2025/06/05/e2/68415f5e535e2.png" style="max-width: 100%;"/><img src="https://img-i-album.toocle.com/view/2025/06/05/3a/68415f63e293a.png" style="max-width: 100%;"/> more>