Category:Hardware & Tools/Pipe Fittings/Tee Fittings

Product Description:The QJS-D560-63-IIC crane gear reducer is a medium-hard tooth surface product, widely used in various lifting equipment at ports, shipyard lifting equipment, steel plants, and other heavy-duty applications. It can withstand sudden stops and starts, strong overload capacity, and impact resistance.Features:Wide reduction ratio, speed up to 200, mechanical transmission efficiency up to 94%Smooth operation, low noise, made from 42CrMo and 35CrMo through forging and tempering treatment, significantly increasing hardness and load-bearing capacityGenerally used for low-speed, high-torque transmission equipment. Ordinary reducers also use several pairs of gears based on the same principle to achieve the desired reduction effect. The ratio of the number of teeth between the large and small gears is the transmission ratioStructure:Three-stage transmission, parallel shaft structure, output shaft can be cylindrical shaft extension, spline, or C-type gear type. It can operate in both forward and reverse directions. When thermal power is insufficient, a circulating oil cooling device can be added.Precautions:After 200~300 hours of operation, the oil should be changed. In subsequent use, the oil quality should be checked regularly. Oil contaminated with impurities or deteriorated must be replaced promptly. Generally, for reducers operating continuously for long periods, replace the oil every 5,000 hours or annually. For reducers that have been idle for a long time, replace the oil before restarting. The reducer should be filled with oil of the same brand as originally used. Do not mix oils of different brands. Oils of the same brand but different viscosities may be mixed.<img src="https://img-i-album.toocle.com/view/2023/03/16/23/6412bed201223.jpg" style="max-width:100%;"/><img src="https://img-i-album.toocle.com/view/2023/03/16/48/6412bed225448.jpg" style="max-width: 100%;"/><img src="https://img-i-album.toocle.com/view/2023/03/16/a3/6412bf094b6a3.jpg" style="max-width: 100%;"/><img src="https://img-i-album.toocle.com/view/2023/03/16/5f/6412bf182e25f.jpg" style="max-width: 100%;"/><img src="https://img-i-album.toocle.com/view/2023/03/16/67/6412bf1845967.jpg" style="max-width: 100%;"/> more>

Category:Hardware & Tools/Wrenches/T-Handle Wrenches

Product Description:Supply of Taiwan Kony Pneumatic Tools  13212214488  Welcome to our store more>

Category:Hardware & Tools/Pipe Fittings/Tee Fittings

Product Description: more>

Category:Hardware & Tools/Pipe Fittings/Tee Fittings

Product Description: more>

Category:Hardware & Tools/Pipe Fittings/Tee Fittings

Product Description: more>

Category:Hardware & Tools/Pipe Fittings/Tee Fittings

Product Description: more>

Category:Hardware & Tools/Pipe Fittings/Tee Fittings

Product Description:Industrial-grade pneumatic hydraulic pulse tools, torque-controlled electric guns. more>

Category:Hardware & Tools/Pipe Fittings/Tee Fittings

Product Description: more>

Category:Hardware & Tools/Pipe Fittings/Tee Fittings

Product Description: more>

Category:Hardware & Tools/Pipe Fittings/Tee Fittings

Product Description: more>

Category:Hardware & Tools/Pipe Fittings/Tee Fittings

Product Description: more>

Category:Hardware & Tools/Pipe Fittings/Tee Fittings

Product Description: more>

Category:Hardware & Tools/Molds & Dies/Other Molds

Product Description:Steel Mold Release AgentSteel mold release agent is a chemical substance used to prevent materials like concrete from adhering to steel molds. Its main component is a water-based polymer film-forming material, combined with various active additives, and manufactured through a scientific processing technique. This release agent is environmentally friendly, non-toxic, odorless, non-flammable, easy to use, forms a film quickly, resists water沖刷, and protects the template.Performance CharacteristicsEnvironmental Performance: Water-based polymer composite formula, non-toxic, odorless, non-flammable, safe and environmentally friendly to use.Isolation Performance: Excellent isolation properties prevent concrete from adhering to the mold, making demolding easy.Water Resistance: After film formation, it can withstand water沖刷, protecting the template from damage.Ease of Use: One application can be used for more than six times without reapplying, making it convenient to use.Applicable ScenariosSteel mold release agent is suitable for various steel molds, wooden molds, and bamboo templates, particularly in concrete construction. It improves the appearance quality of concrete, resulting in a clean, smooth, and uncontaminated concrete surface.Usage MethodApplication: Evenly apply the release agent to the mold surface, ensuring full coverage.Wait for Drying: After application, wait for the release agent to dry and form a film.Pour Concrete: Once dry, proceed with pouring the concrete.Demolding: After the concrete has cured, demolding can be done easily without damaging the mold or the concrete surface. more>

Category:Hardware & Tools/Molds & Dies/Other Molds

Product Description:Steel Mold Release AgentSteel mold release agent is mainly suitable for demolding of various concrete products such as bridges, tunnels, highways, high-speed railways, subways, building construction, prefabricated components, double T-slabs, partition panels, flues, composite slabs, stairs, subway segments, inspection wells, cement pipes, wind turbine towers, curb stones, trench covers, hexagonal blocks, prefabricated U-shaped channels, leak plates, flower pots, imitation wood piles, and more. We provide customized solutions, possess extensive sales experience and strong communication skills, and are highly trusted by customers. Free samples are available; submit your information to receive a sample at no cost.Steel mold release agent refers to a substance applied to construction molds before concrete pouring to prevent the mold from sticking to the concrete surface after pouring, making demolding difficult, or affecting the smoothness of the concrete surface. Its main function is to form a film between the mold and the concrete surface, isolating the two, hence it is also known as a parting agent. Steel mold release agent refers to a substance applied to construction molds before concrete pouring to prevent the mold from sticking to the concrete surface after pouring, making demolding difficult, or affecting the smoothness of the concrete surface. Its main function is to form a film between the mold and the concrete surface, isolating the two, hence it is also known as a parting agent.Steel mold release agent: Primarily composed of imported polymer materials, various additives, super-hydrophilic leveling agents, and other raw materials. It is colorless, odorless, non-polluting, and results in smooth and even product surfaces without affecting subsequent coloring or other processing techniques. It does not impact the adhesion or appearance of the finished product. Demolding is easy and does not damage the mold. Steel mold release agent is widely used for demolding and release treatment of aluminum molds, steel molds, wooden molds, silicone molds, glass, ceramic molds, and plastic molds. It can be diluted 3-10 times with water. It is suitable for anti-stick treatment on the surfaces of various cement product molds, ensuring easy demolding without damaging the mold. It is also used for anti-stick and isolation treatment on gypsum mold surfaces, surface treatment of magnesium oxide product molds, surface treatment of lime product molds, and other water-diluted or water-mixed product surface treatments. Steel mold release agent offers excellent demolding effects and release isolation properties. It has low overall costs, leaves no honeycomb pores or grease on surfaces, is colorless and non-yellowing, and has no irritating odor.Steel mold release agent is a functional substance that acts between the mold and the finished product. It is chemically resistant and does not dissolve when in contact with the chemical components of various resins (especially styrene and amines). It also has heat and stress resistance, is not easily decomposed or worn, adheres to the mold without transferring to the processed part, and does not interfere with painting or other secondary processing operations. Due to the rapid development of processes such as injection molding, extrusion, calendering, compression molding, and lamination, the usage of steel mold release agents has significantly increased.Technical specifications of steel mold release agent:1. Appearance: Transparent white homogeneous liquid;2. Solid content: ±20%;3. pH value: 7-8;4. Stability: No stratification, no demulsification, no caking.Usage method of steel mold release agent:Spray or brush the product directly onto the surface of the item to be demolded. The recommended dilution ratio is 3-10 times, and the specific amount used should be adjusted according to the product system.Performance characteristics of steel mold release agent:It is resistant to acids, alkalis, and hard water, highly water-soluble, and has stable emulsion properties. It can be diluted with water in any proportion without stratification, demulsification, or caking. It has a long shelf life, high solid content, and excellent dispersibility. It is used for demolding in industries such as aluminum molds, steel molds, wooden molds, silicone molds, glass, ceramic molds, plastic molds, rubber, metal, and plastics. Steel mold release agent gives demolded products a smooth, wear-resistant, and anti-adhesive surface with a pleasant feel.Packaging specification of steel mold release agent: 50KG/drum more>

Category:Hardware & Tools/General Hardware Parts/Rigging Hardware

Product Description:1. Features of Tieren Machinery Wire Rope Clips (National Standard Forged): Complies with GB/T5976-2006, ensuring a secure connection with the wire rope. The internal structure is compact, offering excellent mechanical properties. Compared to some gray cast iron KTH rope clips, the wire rope clips (national standard forged) undergo destructive heavy pressure tests, where the clip base undergoes plastic deformation without breaking.<img src="https://img-i-album.toocle.com/view/2023/09/04/42/64f5782492d42.jpg" style="max-width:100%;"/>2. The lay direction of wire ropes is also divided into right-hand and left-hand, so the rope surface should match the lay direction of the rope groove surface of the clip base to increase friction and extend the rope's service life. Therefore, wire rope clips should also be divided into left and right clips and should not be mixed. Applicable wire rope diameter range is 6-60mm. For wire ropes with special structures such as 8-strand or triangular strand, consult the supplier before placing an order.<img src="https://img-i-album.toocle.com/view/2023/09/04/92/64f5782d08792.jpg" style="max-width:100%;"/>3. When purchasing wire rope clips, inspect the dimensions of the U-bolt.① The dimensions of the U-bolt should comply with standards. If the opening is too large, the rope strands may misalign; if the opening is too small, it may affect the clamping force.② The external thread diameter should meet the requirements of GB/T197-2003. Excessive clearance between the thread and the nut can result in insufficient gripping force, and if corroded, it may cause the nut to slip off. This should also be given special attention.<img src="https://img-i-album.toocle.com/view/2023/09/04/4d/64f578359634d.jpg" style="max-width:100%;"/>4. Correct arrangement method for wire rope clips: The arrangement of clips should comply with standard regulations, with the distance between clips being 6-7 times the rope diameter (this is the arrangement method in a natural state). For special connection situations such as thimbles, wedge sockets, splices, etc., used in combination, the rationality of the arrangement and the overall system factor should be considered.<img src="https://img-i-album.toocle.com/view/2023/09/04/3d/64f5783c6ec3d.jpg" style="max-width:100%;"/>(There are many product models, and user technical requirements vary. This site is only a display store. If prices are listed, they are for reference only. Order prices and delivery times need to be negotiated based on order specifications and quantity, surface treatment, usage environment, and other technical requirements. The copyright and interpretation rights of images and content information belong to Baoding Tieren Machinery Manufacturing Co., Ltd.) more>

Category:Hardware & Tools/General Hardware Parts/Rigging Hardware

Product Description:Wire Rope Clips (Usage Requirements and Precautions for Wire Rope Clips)1. Wire rope clips, also known as clamps, rope clips, clips, or fasteners, are, as the name suggests, a type of fixture used to secure wire ropes.&lt;img src="https://img-i-album.toocle.com/view/2023/09/10/0b/64fd9053c0f0b.jpg" style="max-width:100%;"/&gt;2. Requirements for Matching Clips with Wire RopesWhen the wire rope diameter d < 36mm, the inner diameter of the clip should be 0–2mm larger than the wire rope diameter. When the wire rope diameter d ≥ 36mm, the inner diameter of the clip should be 0–4mm larger than the wire rope diameter. If the clip is too large, it may not clamp the rope securely.&lt;img src="https://img-i-album.toocle.com/view/2023/09/10/5d/64fd904ef3a5d.jpg" style="max-width:100%;"/&gt;3. Arrangement and Spacing Requirements for ClipsClips should not be arranged alternately on the wire rope. Instead, the longer rope should press against the shorter rope, meaning the longer rope should be placed on the pressure plate side. The distance A between clips should be equal to 6–7 times the diameter of the wire rope.&lt;img src="https://img-i-album.toocle.com/view/2023/09/10/19/64fd904aca919.jpg" style="max-width:100%;"/&gt;Spacing and Direction Requirements4. Number of Clips on the Wire RopeWire ropes of different diameters require a corresponding number of clips.&lt;img src="https://img-i-album.toocle.com/view/2023/09/10/c7/64fd904662fc7.jpg" style="max-width:100%;"/&gt; more>